|
||
#1
|
||||
|
||||
Can you help me
An FIR band-pass filter is to be designed to pass all frequencies between 0.4 π and 0.7π radians per sample. The filter must meet the following specifications:
The order of the filter must not exceed M=100. The filter must have linear phase. The stop band must be attenuated by at least 20 dB. The transition bandwidths must each be less than 0.2π radians per sample. Should several different possible designs meet these specifications, the design with highest stop-band attenuation is preferred. a) Design the filter using the window method Bartlett. b) Plot the filter's impulse response h[n] and magnitude response using MATLAB. |
مادة إعلانية
|
أدوات الموضوع | البحث في الموضوع |
أنماط العرض | |
|
|